Hi,
I'm trying to use mkisofs & cdrecord (Version 1.8.1) to backup my linux
system, Red Hat, 2.2.12-20, Toshiba Satellite 2060 CDS laptop using an HP
cdwriter plus series 7000.
I get the following error: write track data: error after 5308416 bytes:
I've tried changing my parallel port bios setting to St Bi-direct and ECP (I
don't have an EPP option). I've tried setting speed to 0 on the command line.
ie cdrecord -v speed=0, dev=0,0 -isosize -data data.raw without success.
Have attached the output of cdrecord. Can any one help or does anyone have any
suggestions.
Thanks,
____________________________________________________________________
Get your own FREE, personal Netscape WebMail account today at http://webmail.netscape.com.
Cdrecord 1.8.1 (i586-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 7500 '
Revision : '1.0a'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1040128 = 1015 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 20 MB
Total size: 23 MB (02:17.94) = 10346 sectors
Lout start: 23 MB (02:19/71) = 10346 sectors
Current Secsize: 2048
ATIP start of lead in: -11625 (97:27/00)
ATIP start of lead out: 335100 (74:30/00)
Disk type: phase change
Manuf. index: 0
Manufacturer: Illegal Manufacturer code
Blocks total: 335100 Blocks current: 335100 Blocks remaining: 324754
RBlocks total: 353448 RBlocks current: 353448 RBlocks remaining: 343102
Starting to write CD/DVD at speed 2 in dummy mode for single session.
Last chance to quit, starting dummy write in 9 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: 0 of 20 MB written.
Track 01: 1 of 20 MB written (fifo 100%).
Track 01: 2 of 20 MB written (fifo 75%).
Track 01: 3 of 20 MB written (fifo 50%).
Track 01: 4 of 20 MB written (fifo 25%).
Track 01: 5 of 20 MB written (fifo 100%).CDB: 2A 00 00 00 0A 20 00 00 10 00
Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0
Sense flags: Blk 0 (not valid)
write track data: error after 5308416 bytes
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
CDB: 35 00 00 00 00 00 00 00 00 00
Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 0C 09 00 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 120s
Trouble flushing the cache
Writing time: 27.925s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.007s
CDB: 55 10 00 00 00 00 00 00 10 00
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 26 00 00 80 00 07
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to data part, bit ptr 0 (not valid) field ptr 7
cmd finished after 0.006s timeout 40s
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Sun Jul 16 2000 - 00:50:01 EDT