Hello All,
My first attempt to write a CD (CD to CD copy) under Linux failed. I
have been using my HP 7200 under Window$ for more than a year without
any problem. (That is (I want to put a `was' here, please read on) my
only use of Windows :-).
I was using cdrecord with gcombust at the front-end. But the cd writing
was aborted in about a minute. Search of the Internet (specially mailing
list archives) revealed that some people have experienced similar
problems. But none of the archives gave a precise solution to this.
So, all the gurus out there, can you save me wasting a CD everytime I
try it? Humbly waiting.
Log is as follows. Output from dmesg and lsmod are attached in case you
need them too.
<LOG START>
Cdrecord 1.9 (i586-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 7200 '
Revision : '3.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 786432 = 768 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 650 MB padsize: 30 KB
Lout start: 748 MB (74:06/28) = 333328 sectors
Current Secsize: 2048
ATIP start of lead in: -11082 (97:34/18)
ATIP start of lead out: 335100 (74:30/00)
Disk type: unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 335100 Blocks current: 335100 Blocks remaining: 1772
Starting to write CD/DVD at speed 2 in write mode for single session.
Performing OPC...
Track 01: 0 of 650 MB written.
Sense Bytes: F0 00 03 00 00 00 00 19 00 00 05 32 0C 09 00 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0
Sense flags: Blk 0 (valid)
/usr/local/bin/cdrecord: Input/output error. write_g1: scsi sendcmd:
retryable error
status: 0x2 (CHECK CONDITION)
write track data: error after 1835008 bytes
Sense Bytes: F0 00 00 00 00 00 00 19 00 00 05 4D 00 00 00 00 00 00
Writing time: 22.066s
/usr/local/bin/cdrecord: fifo had 184 puts and 57 gets.
/usr/local/bin/cdrecord: fifo was 0 times empty and 2 times full, min
fill was
74%.
<LOG END>
-- Dr. Muhammad Masroor Ali Assistant Professor, Department of CSE BUET, Dhaka-1000, BangladeshConsultant, n.: Someone who'd rather climb a tree and tell a lie than stand on the ground and tell the truth.
Linux version 2.2.14-5.0 (root@porky.devel.redhat.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Tue Mar 7 20:53:41 EST 2000 Detected 149692530 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 59.60 BogoMIPS Memory: 63004k/65536k available (1084k kernel code, 416k reserved, 968k data, 64k init, 0k bigmem) Dentry hash table entries: 262144 (order 9, 2048k) Buffer cache hash table entries: 65536 (order 6, 256k) Page cache hash table entries: 16384 (order 4, 64k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: Intel Pentium 75 - 200 stepping 0c Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Intel Pentium with F0 0F bug - workaround enabled. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfd9ac PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 65536 bhash 65536) Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9) Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size PIIX3: IDE controller on PCI bus 00 dev 41 PIIX3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfe80-0xfe87, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xfe88-0xfe8f, BIOS settings: hdc:pio, hdd:pio hda: IBM-DAQA-32700, ATA DISK drive hdb: IBM-DAQA-32160, ATA DISK drive hdc: QUANTUM FIREBALL CR8.4A, ATA DISK drive hdd: MATSHITA CR-583, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: IBM-DAQA-32700, 2441MB w/96kB Cache, CHS=620/128/63 hdb: IBM-DAQA-32160, 2067MB w/96kB Cache, CHS=525/128/63 hdc: QUANTUM FIREBALL CR8.4A, 8063MB w/418kB Cache, CHS=16383/16/63 hdd: ATAPI 8X CD-ROM drive, 128kB Cache Uniform CDROM driver Revision: 2.56 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed 8regs : 150.495 MB/sec 32regs : 110.490 MB/sec using fastest function: 8regs (150.495 MB/sec) scsi : 0 hosts. scsi : detected total. md.c: sizeof(mdp_super_t) = 4096 Partition check: hda: hda1 hda2 < hda5 hda6 > hda3 hdb: hdb1 hdc: [PTBL] [1027/255/63] hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 hdc11 > autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 64k freed Adding Swap: 136512k swap-space (priority -1) es1371: version v0.22 time 13:51:29 Sep 19 2000 es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x06 es1371: found es1371 rev 6 at io 0x1200 irq 11 es1371: features: joystick 0x0 es1371: codec vendor v (0x838476) revision 9 (0x09) es1371: codec features 18bit DAC 18bit ADC es1371: stereo enhancement: SigmaTel SS3D paride: version 1.04 installed paride: epat registered as protocol 0 pg: pg version 1.02, major 97 parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPPS2] parport0: detected irq 7; use procfs to enable interrupt-driven operation. parport0: no IEEE-1284 device present. pg0: Sharing parport0 at 0x378 pg0: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 1 (5/3), delay 1 pg0: HP CD-Writer+ 7200, slave VFS: Disk change detected on device ide1(22,64) ISO 9660 Extensions: Microsoft Joliet Level 1 ISOFS: changing to secondary root ISO 9660 Extensions: Microsoft Joliet Level 1 ISOFS: changing to secondary root pcd: pcd version 1.07, major 46, nice 0 pcd0: Sharing parport0 at 0x378 pcd0: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 1 (5/3), delay 1 pcd0: Slave: CD-Writer+ 7200 pcd0: read toc header completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3 pcd0: read toc header: Sense key: 5, ASC: 24, ASQ: 0 VFS: Disk change detected on device pcd(46,0) pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3 pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3 pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3 pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3 pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3 pcd0: read block completion: alt=0x51 stat=0x51 err=0x50 loop=0 phase=3 end_request: I/O error, dev 2e:00 (PCD), sector 64 isofs_read_super: bread failed, dev=2e:00, iso_blknum=16, block=32 pg: pg version 1.02, major 97 pg0: Sharing parport0 at 0x378 pg0: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 1 (5/3), delay 1 pg0: HP CD-Writer+ 7200, slave CSLIP: code copyright 1989 Regents of the University of California PPP: version 2.3.7 (demand dialling) PPP line discipline registered. registered device ppp0 PPP BSD Compression module registered PPP Deflate Compression module registered
Module Size Used by ppp_deflate 40204 0 (autoclean) bsd_comp 3832 0 (autoclean) ppp 20908 2 (autoclean) [ppp_deflate bsd_comp] slhc 4632 1 (autoclean) [ppp] pg 5836 0 sg 15516 0 (autoclean) (unused) parport_pc 7400 1 (autoclean) epat 6848 1 paride 3532 1 [pg epat] parport 7516 1 [parport_pc paride] autofs 9668 1 (autoclean) lockd 31912 1 (autoclean) sunrpc 53604 1 (autoclean) [lockd] es1371 27268 0 soundcore 2724 4 [es1371]
-- To unsubscribe, send mail to: linux-parport-request@torque.net -- -- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Thu Sep 21 2000 - 21:57:35 EDT