Re: [PARPORT] Sony MSAC PR1 : it works

From: jjore@imation.com
Date: Fri Dec 15 2000 - 14:14:36 EST

  • Next message: rjh@world.std.com: "Re: [PARPORT] [patch] 2.4.0-test13-pre1: parport_pc 'hardware' para meter"

    I don't recall anyone responding to that. I'd guess the issue is in the pd
    module, perhaps the stick is particularly slow or something. It's a guess
    anyway. Perhaps it'd be a good idea for you to try doing some read/write
    compares through the stick to see what happens.

    Josh

    Jean-Marc.Notin@loria.fr
    Sent by: owner-linux-parport@gear.torque.net
    12/07/00 04:22 AM
    Please respond to Jean-Marc.Notin

            To: linux-parport@torque.net
            cc:
            Subject: Re: [PARPORT] Sony MSAC PR1 : it works

    Hi all !

            Well, thanks to J. Jore, I upgraded epat.c and it now works.
    I can download files from my memory stick... Yet, I get i/o errors I
    don't understand (especially because it seems to work anyway...) :

    pda: epat 1.02, Shuttle EPAT chip c7 at 0x378, mode 0 (4-bit), delay 1
    pda: MEMORYSTICK, master, 15840 blocks [7M], (495/2/16), removable media
     pda: pda1
    pda: Lock done: status = 0x451 = ERR SEEK READY ABRT
    pda: do_pd_read: status = 0x451 = ERR SEEK READY ABRT
    pda: do_pd_read: status = 0x451 = ERR SEEK READY ABRT
    pda: do_pd_read: status = 0x451 = ERR SEEK READY ABRT
    pda: do_pd_read: status = 0x451 = ERR SEEK READY ABRT
    pda: do_pd_read: status = 0x451 = ERR SEEK READY ABRT
    pda: do_pd_read: status = 0x451 = ERR SEEK READY ABRT
    end_request: I/O error, dev 2d:01 (PD), sector 2
    pda: Lock: status = 0x451 = ERR SEEK READY ABRT
    pda: Lock: status = 0x451 = ERR SEEK READY ABRT

    What can i do to avoid these error messages ? May I use some special
    option when loading epat or pd ?

    --
    Jean-Marc Notin
    

    -- To unsubscribe, send mail to: linux-parport-request@torque.net -- -- with the single word "unsubscribe" in the body of the message. --

    -- To unsubscribe, send mail to: linux-parport-request@torque.net -- -- with the single word "unsubscribe" in the body of the message. --



    This archive was generated by hypermail 2b29 : Fri Dec 15 2000 - 14:20:37 EST