Do;
#insmod parport
in the beginning.
Do not use cdrecord 1.9, use 1.8 instead. 1.9 doesn't work for my
HP7200e for some reason.
If you bios is in eep mode you should be able see your device in cdrecord
-scanbus.
-----Original Message-----
From: Rajarshi Bandyopadhyay [mailto:rajb@rice.edu]
Sent: 10 Ocak 2001 Çarşamba 16:30
To: linux-parport@torque.net
Subject: [PARPORT] More HP-7200e problems :-(
Hi Folks
Have recently got an HP-7200 external CD-RW drive...and can't
get it to work! I have read all the archives of this list...but
none seem to be having the kind of problem which I face.
I have an AMD-K6-500 running RH 7.0. I have an internal Creative
CD-ROM drive also. I have NO SCSI controllers/devices.
I started with the usual setup, loading paride, epat and pg.
got the following dmesg output
---------------------------------------------------------------
[root@gh-1194 /root]# insmod paride
Using /lib/modules/2.2.16-22/misc/paride.o
paride: version 1.04 installed
[root@gh-1194 /root]# insmod epat
Using /lib/modules/2.2.16-22/misc/epat.o
paride: epat registered as protocol 0
[root@gh-1194 /root]# insmod pg
Using /lib/modules/2.2.16-22/misc/pg.o
pg: pg version 1.02, major 97
pg0: Sharing parport0 at 0x378
pg0: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 5 (EPP-32), delay 1
pg0: HP CD-Writer+ 7200, slave
[root@gh-1194 /root]#
----------------------------------------------------------------
So far so good? Then cdrecord -scanbus still does not help.
----------------------------------------------------------------
[root@gh-1194 /root]# cdrecord -scanbus
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jrg Schilling
Using libscg version 'schily-0.1'
scsibus0:
cdrecord: Inappropriate ioctl for device. Cannot send SCSI cmd via ioctl
----------------------------------------------------------------
So I load the ide-scsi module.
--------------------------------------------------------------------
[root@gh-1194 /root]# insmod ide-scsi
Using /lib/modules/2.2.16-22/scsi/ide-scsi.o
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: CREATIVE Model: CD5233E Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray
----------------------------------------------------------------------
Note that there is no mention of the CD-RW here. But cdrecord -scanbus
seems to work!
--------------------------------------------------------------------
[root@gh-1194 /root]# cdrecord -scanbus
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jrg Schilling
Linux sg driver version: 2.1.38
Using libscg version 'schily-0.1'
scsibus0:
cdrecord: Warning: controller returns wrong size for CD capabilities page.
0,0,0 0) 'CREATIVE' 'CD5233E ' '1.00' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) 'HP ' 'CD-Writer+ 7200 ' '3.01' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
----------------------------------------------------------------------
But try running cdrecord...and see what happens
------------------------------------------------------------------
[root@gh-1194 /root]# cdrecord -dev=1,0,0 -inq
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jrg Schilling
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 2.1.38
Using libscg version 'schily-0.1'
cdrecord: Inappropriate ioctl for device. Cannot send SCSI cmd via ioctl
------------------------------------------------------------------
Am I missing something...forgot to load some module, maybe?
Please assist me.
Regards
Raj
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Wed Jan 10 2001 - 10:46:41 EST