[PARPORT] [PATCH] smaller parport_pc for non-PCI boxes

From: Paul Gortmaker (p_gortmaker@yahoo.com)
Date: Thu Mar 01 2001 - 02:12:15 EST

  • Next message: bad_knee: "Re: [PARPORT] paride not reporting correct drive size"

    There is quite a bit of PCI stuff that gets compiled into parport_pc.c
    even when CONFIG_PCI isn't enabled. This patch cuts down the size quite
    a bit (more than 4k off the object, about 1k off the zImage) for the
    older non-PCI machines which are typically resource starved anyway...

    Patch is against 2.4.2

    Paul.

    --- drivers/parport/parport_pc.c~ Wed Feb 14 02:41:01 2001
    +++ drivers/parport/parport_pc.c Thu Mar 1 00:54:19 2001
    @@ -11,6 +11,7 @@
      * Cleaned up include files - Russell King <linux@arm.uk.linux.org>
      * DMA support - Bert De Jonghe <bert@sophis.be>
      * Many ECP bugs fixed. Fred Barnes & Jamie Lokier, 1999
    + * More PCI support now conditional on CONFIG_PCI, 03/2001, Paul G.
      */
     
     /* This driver should work with any hardware that is broadly compatible
    @@ -2182,6 +2183,7 @@
     }
     
     
    +#ifdef CONFIG_PCI
     /* Via support maintained by Jeff Garzik <jgarzik@mandrakesoft.com> */
     static int __devinit sio_via_686a_probe (struct pci_dev *pdev)
     {
    @@ -2547,7 +2549,6 @@
     
     static int __init parport_pc_init_superio (void)
     {
    -#ifdef CONFIG_PCI
             const struct pci_device_id *id;
             struct pci_dev *pdev;
     
    @@ -2558,10 +2559,13 @@
     
                     return parport_pc_superio_info[id->driver_data].probe (pdev);
             }
    -#endif /* CONFIG_PCI */
     
             return 0; /* zero devices found */
     }
    +#else
    +static struct pci_driver parport_pc_pci_driver;
    +static int __init parport_pc_init_superio(void) {return 0;}
    +#endif /* CONFIG_PCI */
     
     /* This is called by parport_pc_find_nonpci_ports (in asm/parport.h) */
     static int __init __attribute__((unused))

    _________________________________________________________
    Do You Yahoo!?
    Get your free @yahoo.com address at http://mail.yahoo.com

    -- To unsubscribe, send mail to: linux-parport-request@torque.net --
    -- with the single word "unsubscribe" in the body of the message. --



    This archive was generated by hypermail 2b29 : Thu Mar 01 2001 - 04:01:29 EST