Re: [PARPORT] paride not reporting correct drive size

From: bad_knee (bad_knee@bigfoot.com)
Date: Thu Mar 01 2001 - 06:22:41 EST

  • Next message: Thomas Speck: "[PARPORT] pinout for cable ide <-> par. port"

    > A quick google search turned up this one... (25 nov. 2000)
    >
    > http://www.torque.net/parport/archive/current/3434.html
    >
    > I haven't tested the patch, but it would seem to be relevant. If it works,
    > would someone mind getting this into the official kernel soon, as getting
    > hold of less-than-8GB IDE drives is getting hard? :)
    >

    kernel: paride: version 1.05 installed
    kernel: paride: epat registered as protocol 0
    kernel: pd: pd version 1.06, major 45, cluster 64, nice 0
    kernel: pda: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 5 (EPP-32),
    delay 1
    kernel: pda: Maxtor 32049H2, master, 39062500 blocks [19073M],
    (2431/255/63), fixed media, LBA mode
    kernel: pda: pda1

    hmm.. well, here goes nothin!

    Thanks,
    Tobias

    -- To unsubscribe, send mail to: linux-parport-request@torque.net --
    -- with the single word "unsubscribe" in the body of the message. --

    This archive was generated by hypermail 2b29 : Thu Mar 01 2001 - 06:24:55 EST