Hi,
Curious. I am using gcc-2.91.66 which is, I believe, the recommended compiler.
Or has this changed again?
Richard
Gene Heskett wrote:
> Gene Heskett sends Greetings to Richard Polton;
>
> >Hi,
>
> >I tried 2.4.2-ac28 and met with the same results 8-( I have been unable to
> >compile
> >2.4.3 due to an undefined symbol in one of the modules so that is the limit
> >of my testing to date.
>
> Although I'm not using anything ATM that requires this parport stuff,
> my scanner driver being self-contained, I'd suggest the compiler may be
> the problem rather than the undefined symbol.
>
> Along about 2.96-75, it started to build good code again, and its been
> sitting at 2.96-79 for about 2 weeks now, building good code for every
> -acxx kernel from 2.4.2 to 2.4.3.
>
> The latest, -79, is on rawhide the last time I looked yesterday.
>
> >Thanks,
>
> >Richard
>
> >Tim Waugh wrote:
>
> >> On Fri, Mar 30, 2001 at 08:11:24AM +0100, Richard Polton wrote:
> >>
> >> > I have tried with 2.4.2-ac9 and the behaviour is the same. I am attaching
> >> > the
> >>
> >> Okay. Other people have been saying that ac10 is known to work, but
> >> it might be a different problem that you're seeing.
> >>
> >> If you could try out a more recent 2.4.2-ac kernel than that I would
> >> be grateful. I think 2.4.2-ac28 is the last one.
> >>
> >> Thanks,
> >> Tim.
> >> */
> >>
> >> ------------------------------------------------------------------------
> >> Part 1.2Type: application/pgp-signature
>
> >-- To unsubscribe, send mail to: linux-parport-request@torque.net --
> >-- with the single word "unsubscribe" in the body of the message. --
>
> Cheers, Gene
> --
> Gene Heskett, CET, UHK |Amiga A2k Zeus040, Linux @ 500mhz
> email gene underscore heskett at iolinc dot net
> #Amiga based X10 home automation program EZHome, see at:#
> <http://www.thirdwave.net/~jimlucia/amigahomeauto>
> This messages reply content, but not any previously quoted material,
> is 2001 by Gene Heskett, all rights reserved.
> --
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Wed Apr 04 2001 - 11:30:38 EDT