Hello,
I would like burn CDs under Linux RH7.0 using Micro Solutions Backpack CD
Rewriter 4E connected
through paralel port.
It works as another CD-ROM drive (using pcd device) but not as CDR. Please,
do anybody has
an experience with buring through paralel port CDR? Your help is welcome.
I have Compaq Armada 1700 computer with internal CD-ROM drive (TOSHIBA) and
external Micro Solutions Backpack CD Rewriter 4E connected on paralel port
0.
OS: RedHat 7.0, Kernel 2.2.16-22 + backpack module obtained from
Micro-solutions.
A record of actions I have done follows:
SHELL> insmod backpack
Using /lib/modules/2.2.16-22/misc/backpack.o
BACKPACK Protocol Driver V1.0.0
Copyright 1999 by Micro Solutions, Inc., DeKalb IL.
paride: backpack registered as protocol 0
SHELL> insmod pg verbose 1
Using /lib/modules/2.2.16-22/misc/pg.o
pg: pg version 1.02, major 97
backpack: LPT 0378, Mfg SMC[16]
backpack: ID 94, Tx EPP (Dword)
pg0: Sharing parport0 at 0x378
pg0: MITSUMI CR-4804TE, master
SHELL> cdrecord --scanbus
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
Using libscg version 'schily-0.1'
scsibus0:
cdrecord: Inappropriate ioctl for device. Cannot send SCSI cmd via ioctl
SHELL> cdrecord dev=0,0,0 -data /home/isofs/cd_home_mach.iso
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Using libscg version 'schily-0.1'
cdrecord: Inappropriate ioctl for device. Cannot send SCSI cmd via ioctl
SHELL> modprobe ide-scsi
Note: /etc/modules.conf is more recent than
/lib/modules/2.2.16-22/modules.dep
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 1 host.
Vendor: TOSHIBA Model: CD-ROM XM-1902B Rev: 1218
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
SHELL> cdrecord --scanbus
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
Linux sg driver version: 2.1.38
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'TOSHIBA ' 'CD-ROM XM-1902B ' '1218' Removable CD-ROM
0,1,0 1) *
0,2,0 2) *
0,3,0 3) *
0,4,0 4) *
0,5,0 5) *
0,6,0 6) *
0,7,0 7) *
scsibus1:
1,0,0 100) 'MITSUMI ' 'CR-4804TE ' '3.0D' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
SHELL> cdrecord dev=1,0,0 -data /home/isofs/cd_home_mach.iso
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 2.1.38
Using libscg version 'schily-0.1'
cdrecord: Inappropriate ioctl for device. Cannot send SCSI cmd via ioctl
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Sun Apr 22 2001 - 15:08:03 EDT