Hello!
I have a problem with the HP7100 burner:
this is the only way I have to load the pg driver
modprobe pg drive0=0x378,0,0,2,0,0
I know I need EPP 32 to work at 2x with the burner
(with other motherboards than K7V I have already succeded)
so I tried :
/sbin/modprobe pg drive0=0x378,0,0,5,1,0
/sbin/modprobe pg drive0=0x378,0,0,5,1,1
/sbin/modprobe pg drive0=0x378,0,0,5,1,-1
but the answer was:
/lib/modules/2.4.7-1/kernel/drivers/block/paride/pg.o: init_module:
Operation not permitted
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
-----------------------------------------------
kernel 2.4.7 on RH 7.1
dmesg:
/lib/modules/2.4.7-1/kernel/drivers/block/paride/pg.o: insmod
/lib/modules/2.4.7-1/kernel/drivers/block/paride/pg.o failed
/lib/modules/2.4.7-1/kernel/drivers/block/paride/pg.o: insmod pg failed
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
parport0: Found 1 daisy-chained devices
parport_pc: Via 686A parallel port: io=0x378
pg0: Adapter not found
pg: No ATAPI device detected
pg: pg version 1.02, major 97
pg0: Adapter not found
pg: No ATAPI device detected
pg: pg version 1.02, major 97
pg0: Sharing parport0 at 0x378
pg0: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 2 (8-bit), delay 1
pg0: HP CD-Writer+ 7100, slave
does anybody knows where I am doing wrong?
thanks
Gianandrea
PS In windows it works (:-< ) without problems
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Wed Aug 01 2001 - 15:39:42 EDT