>Perhaps you don't have a lowlevel port driver, such as parport_pc,
>loaded. What does 'dmesg' say? The ppdev driver is quite verbose at
>the moment and so it might have logged a kernel message detailing its
>complaint.
dmesg says,
-------------------------------
onfig: cr_30=01 60,61=0378 70=07 74=03, f0=00
Winbond LPT Config: active=yes, io=0x0378 irq=7, dma=3
Winbond LPT Config: irqtype=pulsed low, high-Z, ECP fifo threshold=0
Winbond LPT Config: Port mode=Standard (SPP) and Bidirectional(PS/2)
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
ip_conntrack (2048 buckets, 16384 max)
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 11 for device 00:0d.0
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
Winbond chip at EFER=0x3f0 key=0x87 devid=97 devrev=73 oldid=ff
Winbond chip type 83977TF / SMSC 97w33x/97w34x
Winbond LPT Config: cr_30=01 60,61=0378 70=07 74=03, f0=00
Winbond LPT Config: active=yes, io=0x0378 irq=7, dma=3
Winbond LPT Config: irqtype=pulsed low, high-Z, ECP fifo threshold=0
Winbond LPT Config: Port mode=Standard (SPP) and Bidirectional(PS/2)
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
PCI: Found IRQ 10 for device 00:0b.0
ymfpci: YMF724 at 0xe3000000 IRQ 10
ac97_codec: AC97 Audio codec, id: 0x8384:0x7605 (SigmaTel STAC9704)
hdc: ATAPI 36X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
ppdev: user-space parallel port driver
ppdev0: no associated port!
-------------------------------
I try to run "insmod ppdev",but I was said "ppdev already exists".
shun
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Mon Oct 01 2001 - 12:22:57 EDT