>From firstname.lastname@example.org Sat Oct 13 23:08:48 2001
>On Thursday 11 October 2001 22:00, Tim Waugh <email@example.com> wrote:
>> > cdrecord: Inappropriate ioctl for device. Cannot send SCSI cmd via ioctl
>> Upgrade cdrecord.
>Yes, thanks, scanbus worked straight away with 1.11a08
>I was amazed to find that RedHat 7.1 came with cdrecord 1.10, yet Suse 7.2
>six months later had 1.09 and no update offered on website.
>However I'm getting quite similar errors as I did with 1.10 under RedHat.
>What do you make of all this?
>myates:~ # cdrecord -v -dev=0,0,0 /mnt/myback/cdmm.img
>Cdrecord 1.11a08 (i586-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
>TOC Type: 1 = CD-ROM
>scsibus: 0 target: 0 lun: 0
>Using libscg version 'schily-0.5'
>Device type : Removable CD-ROM
>Version : 0
>Response Format: 1
>Vendor_info : 'TEAC '
>Identifikation : 'CD-W54E '
>Revision : '1.1B'
>Device seems to be: Generic mmc CD-RW.
>Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
>Driver flags : SWABAUDIO
>Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
>Drive buf size : 1300480 = 1270 KB
>FIFO size : 4194304 = 4096 KB
>Track 01: data 671 MB
>Total size: 770 MB (76:22.10) = 343658 sectors
>Lout start: 771 MB (76:24/08) = 343658 sectors
>Current Secsize: 2048
>ATIP info from disk:
> Indicated writing power: 5
> Is not unrestricted
> Is not erasable
> ATIP start of lead in: -11649 (97:26/51)
> ATIP start of lead out: 359849 (79:59/74)
>Disk type: Long strategy type (Cyanine, AZO or similar)
>Manuf. index: 10
>Manufacturer: Lead Data Inc.
>Blocks total: 359849 Blocks current: 359849 Blocks remaining: 16191
>Starting to write CD/DVD at speed 1 in write mode for single session.
>Last chance to quit, starting real write in 0 seconds. Operation starts.
>Waiting for reader process to fill input buffer ... input buffer ready.
>Starting new track at sector: 0
>Track 01: 7 of 671 MB written (fifo 1%).cdrecord: Input/output error.
>write_g1: scsi sendcmd: no error
>CDB: 2A 00 00 00 0E 10 00 00 10 00
>status: 0x2 (CHECK CONDITION)
>Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 00 00
>Sense Key: 0x5 Illegal Request, Segment 0
>Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
>Sense flags: Blk 0 (not valid)
>cmd finished after 0.003s timeout 40s
This is a buffer underrun. If this is a writer on a parallel port, read
README.parallel else read README.ATAPI. This is caused by a miss configuration.
EMail:firstname.lastname@example.org (home) Jörg Schilling D-13353 Berlin
email@example.com (uni) If you don't have iso-8859-1
firstname.lastname@example.org (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
-- To unsubscribe, send mail to: email@example.com --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Sun Oct 14 2001 - 05:50:59 EDT