[PARPORT] Freecom Traveller CD-RW [Re: ioctl ??]

From: Mike Yates (mike@myates.demon.co.uk)
Date: Sat Oct 13 2001 - 16:51:18 EDT

  • Next message: Joerg Schilling: "Re: [PARPORT] Freecom Traveller CD-RW [Re: ioctl ??]"

    On Thursday 11 October 2001 22:00, Tim Waugh <twaugh@redhat.com> wrote:

    > > cdrecord: Inappropriate ioctl for device. Cannot send SCSI cmd via ioctl
    > >    
    >
    > Upgrade cdrecord.

    Yes, thanks, scanbus worked straight away with 1.11a08
    I was amazed to find that RedHat 7.1 came with cdrecord 1.10, yet Suse 7.2
    six months later had 1.09 and no update offered on website.

    However I'm getting quite similar errors as I did with 1.10 under RedHat.
    What do you make of all this?

    myates:~ # cdrecord -v -dev=0,0,0 /mnt/myback/cdmm.img
    Cdrecord 1.11a08 (i586-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
    TOC Type: 1 = CD-ROM
    scsidev: '0,0,0'
    scsibus: 0 target: 0 lun: 0
    Using libscg version 'schily-0.5'
    atapi: 1
    Device type : Removable CD-ROM
    Version : 0
    Response Format: 1
    Vendor_info : 'TEAC '
    Identifikation : 'CD-W54E '
    Revision : '1.1B'
    Device seems to be: Generic mmc CD-RW.
    Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
    Driver flags : SWABAUDIO
    Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
    Drive buf size : 1300480 = 1270 KB
    FIFO size : 4194304 = 4096 KB
    Track 01: data 671 MB
    Total size: 770 MB (76:22.10) = 343658 sectors
    Lout start: 771 MB (76:24/08) = 343658 sectors
    Current Secsize: 2048
    ATIP info from disk:
      Indicated writing power: 5
      Is not unrestricted
      Is not erasable
      ATIP start of lead in: -11649 (97:26/51)
      ATIP start of lead out: 359849 (79:59/74)
    Disk type: Long strategy type (Cyanine, AZO or similar)
    Manuf. index: 10
    Manufacturer: Lead Data Inc.
    Blocks total: 359849 Blocks current: 359849 Blocks remaining: 16191
    Starting to write CD/DVD at speed 1 in write mode for single session.
    Last chance to quit, starting real write in 0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    Performing OPC...
    Starting new track at sector: 0
    Track 01: 7 of 671 MB written (fifo 1%).cdrecord: Input/output error.

    write_g1: scsi sendcmd: no error
    CDB: 2A 00 00 00 0E 10 00 00 10 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 00 00
    Sense Key: 0x5 Illegal Request, Segment 0
    Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
    Sense flags: Blk 0 (not valid)
    resid: 32768
    cmd finished after 0.003s timeout 40s
     
    write track data: error after 7372800 bytes
    Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
    Writing time: 74.569s
    Fixating...
    Fixating time: 244.931s
    cdrecord: fifo had 353 puts and 226 gets.
    cdrecord: fifo was 4 times empty and 2 times full, min fill was 0%.
    myates:~ #

    woops, there goes another blank!

    -- 
    Mike Yates         Frome,  Somerset,  England
    

    -- To unsubscribe, send mail to: linux-parport-request@torque.net -- -- with the single word "unsubscribe" in the body of the message. --



    This archive was generated by hypermail 2b29 : Sat Oct 13 2001 - 16:53:28 EDT