>From: Mike Yates <email@example.com>
>On Sunday 14 October 2001 10:35, firstname.lastname@example.org wrote:
>> >Track 01: 7 of 671 MB written (fifo 1%).cdrecord: Input/output error.
>> >write_g1: scsi sendcmd: no error
>> >CDB: 2A 00 00 00 0E 10 00 00 10 00
>> >status: 0x2 (CHECK CONDITION)
>> >Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 00 00
>> >Sense Key: 0x5 Illegal Request, Segment 0
>> >Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
>> >Sense flags: Blk 0 (not valid)
>> >resid: 32768
>> >cmd finished after 0.003s timeout 40s
>> This is a buffer underrun. If this is a writer on a parallel port, read
>> README.parallel else read README.ATAPI. This is caused by a miss
>Can anyone suggest exactly what misconfiguration?
>I have a p200 with 128Mb which runs the Freecom at x4 speed in Windoze with
>no buffer underruns, even when playing games!
>I have a TEAC-W54E on IDE at work which works beautifully on cdrecord 1.10
A P200 will not allow 4x writing. You need at least 233 MHz for 4x.
Otherwise read README.parallel to see how to configure the parallel port.
EMail:email@example.com (home) Jörg Schilling D-13353 Berlin
firstname.lastname@example.org (uni) If you don't have iso-8859-1
email@example.com (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
-- To unsubscribe, send mail to: firstname.lastname@example.org --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Thu Oct 18 2001 - 17:37:14 EDT