Re: [PARPORT] cdrecord/sg/bpck6 problem

From: Joerg Schilling (schilling@fokus.gmd.de)
Date: Wed Oct 24 2001 - 13:04:29 EDT

  • Next message: Ken Hahn: "Re: [PARPORT] cdrecord/sg/bpck6 problem"

    >From: Tim Waugh <twaugh@redhat.com>

    >I'm trying to figure out where I've gone wrong here. I have:

    >- a Backpack CD-RW which has worked in the past
    >- a variety of blank CDs
    >- cdrecord 1.10 (which has worked with this hardware in the past)
    >- an onboard parallel port set to EPP in the BIOS (this same port has
    > worked in the past for writing CDs to the CD-RW)
    >- a variety of 2.4.x kernels

    >What I don't remember is exactly which 2.4.x kernel has before worked
    >for me. :-/

    >Here's what I get:

    >[root@cyberelk .raw]# cdrecord -v speed=3D1 dev=3D3,0,0 *.wav
    >Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J=F6rg Schilling
    >TOC Type: 0 =3D CD-DA
    >scsidev: '3,0,0'
    >scsibus: 3 target: 0 lun: 0
    >Linux sg driver version: 3.1.20
    >Using libscg version 'schily-0.5'
    >atapi: 1
    >Device type : Removable CD-ROM
    >Version : 0
    >Response Format: 1
    >Vendor_info : 'LG '
    >Identifikation : 'CD-RW CED-8083B '
    >Revision : '1.06'
    >Device seems to be: Generic mmc CD-RW.
    >Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
    >Driver flags : SWABAUDIO
    >Drive buf size : 1024000 =3D 1000 KB
    >FIFO size : 4194304 =3D 4096 KB
    >Track 01: audio 30 MB (03:02.49) no preemp
    >Track 02: audio 49 MB (04:54.53) no preemp
    >Track 03: audio 30 MB (03:03.30) no preemp
    >Track 04: audio 36 MB (03:37.76) no preemp
    >Track 05: audio 50 MB (04:57.64) no preemp
    >Track 06: audio 36 MB (03:35.29) no preemp
    >Track 07: audio 42 MB (04:11.20) no preemp
    >Track 08: audio 29 MB (02:53.46) no preemp
    >Track 09: audio 35 MB (03:30.10) no preemp
    >Track 10: audio 35 MB (03:28.29) no preemp
    >Track 11: audio 35 MB (03:28.64) no preemp
    >Track 12: audio 29 MB (02:54.82) no preemp
    >Track 13: audio 35 MB (03:28.66) no preemp
    >Track 14: audio 35 MB (03:29.62) no preemp
    >Track 15: audio 42 MB (04:14.60) no preemp
    >Track 16: audio 37 MB (03:40.66) no preemp
    >Track 17: audio 38 MB (03:51.60) no preemp
    >Track 18: audio 43 MB (04:17.00) no preemp
    >Total size: 678 MB (67:13.72) =3D 302529 sectors
    >Lout start: 678 MB (67:15/54) =3D 302529 sectors
    >Current Secsize: 2048
    >ATIP info from disk:
    > Indicated writing power: 5
    > Is not unrestricted
    > Is not erasable
    > Disk sub type: Medium Type A, high Beta category (A+) (3)
    > ATIP start of lead in: -11634 (97:26/66)
    > ATIP start of lead out: 337350 (75:00/00)
    >Disk type: Short strategy type (Phthalocyanine or similar)
    >Manuf. index: 3
    >Manufacturer: CMC Magnetics Corporation
    >Blocks total: 337350 Blocks current: 337350 Blocks remaining: 34821
    >Starting to write CD/DVD at speed 2 in write mode for single session.
    >Last chance to quit, starting real write in 0 seconds. Operation starts.
    >Waiting for reader process to fill input buffer ... input buffer ready.
    >Performing OPC...
    >Starting new track at sector: 0
    >Track 01: 0 of 30 MB written.cdrecord: Input/output error. write_g1: scs=
    >i sendcmd: no error
    >CDB: 2A 00 00 00 00 00 00 00 0D 00
    >status: 0x2 (CHECK CONDITION)
    >Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00 00 00
    >Sense Key: 0x5 Illegal Request, Segment 0
    >Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
    >Sense flags: Blk 0 (not valid)
    >resid: 30576
    >cmd finished after 0.001s timeout 40s

    Due to a firmware bug, I have so far been unable to write Audio CD's in TAO
    on goldstar drives.

    Jörg

     EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
           js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
           schilling@fokus.gmd.de (work) chars I am J"org Schilling
     URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix

    -- To unsubscribe, send mail to: linux-parport-request@torque.net --
    -- with the single word "unsubscribe" in the body of the message. --



    This archive was generated by hypermail 2b29 : Wed Oct 24 2001 - 13:10:19 EDT