>From owner-linux-parport@gear.torque.net Fri Nov 23 20:46:57 2001
>I am trying to configure HP 7200 CD-Writer on kernel 2.0.36 (RedHat 5.2)
>Following output is obtained on loading the required modules:
>---------------------------------
>$ insmod paride
>paride: version 1.02 installed
>$ insmod epat
>paride: epat registered as protocol 0
>$ insmod pg verbose=1
>pg: pg version 1.02s, major 97
>pg0: epat: port 0x3bc, mode 0, ccr ff, test=(255,255,510)
>pg0: epat: port 0x3bc, mode 1, ccr ff, test=(255,255,510)
>pg0: epat: port 0x3bc, mode 2, ccr ff, test=(255,255,510)
>pg0: epat: port 0x378, mode 0, ccr 0, test=(256,0,0)
>pg0: epat: port 0x378, mode 1, ccr 40, test=(255,224,448)
>pg0: epat: port 0x378, mode 2, ccr 0, test=(256,0,0)
>pg0: epat: port 0x378, mode 3, ccr 0, test=(256,0,0)
>pg0: epat: port 0x378, mode 4, ccr 0, test=(256,0,0)
>pg0: epat: port 0x378, mode 5, ccr 0, test=(256,0,0)
>pg0: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 5 (EPP-32), delay 1
>pg0: Reset (1) signature = 7f 7f 7f 7f 7f (incorrect)
>pg0: Reset (203) signature = 1 1 1 14 eb
>pg0: HP CD-Writer+ 7200, slave
>----------------------------------------
>pg seems to have detected the CD-Writer.
>However, cdrecord doesn't detect it.
>---------------------------------------
>$ cdrecord -scanbus
>cdrecord release 1.6 copyright (c) 1995-1998 J%rg Schilling
Unless you like to build a demonstrator for antique software you
should use recent releases:
http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/problems.html
Jörg
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.gmd.de (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Mon Nov 26 2001 - 08:36:21 EST