Hello. Does any one have any ideas what the problem might be with par0
on the above kernel?
It's not seeing the device, which is there, and I followed instruct. in
parport.txt for building the driver into the kernel. Can anyone tell
from the following info whether I missed something, or if this might be
a bug?
Any input greatly appreciated.
Thanks,
Steve
debian:/usr/src/kernel-source-2.4.14# ls -l /dev/par*
crw-rw---- 1 root lp 6, 0 Oct 18 2000 /dev/par0
crw-rw---- 1 root lp 6, 1 Oct 18 2000 /dev/par1
crw-rw---- 1 root lp 6, 2 Oct 18 2000 /dev/par2
Driver is in the kernel - here's relevant config/other details:
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
Checkpc -f:
Warning - ** cannot open '/var/log/lp-errs' - 'Permission denied'
Warning - ** cannot open '/var/log/lp-acct' - 'Permission denied'
Warning - lp: cannot open lp device '/dev/par0' - No such device
cat /proc/interrupts:
4: 12139 XT-PIC serial
10: 0 XT-PIC via82cxxx
cat /proc/ioports:
0378-037a : parport0
lines included in lilo.conf:
parport=0x378,7
lp=parport0
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Sun Jan 13 2002 - 10:04:53 EST