Ooops, I meant "modprobe pg" and not "mount as pg."
Once you modprobe pg, then use cdrecord to write.
At 02:24 PM 3/19/2002 -0600, Al Crowley wrote:
>
>Mounting it via pcd0 only mounts it as a CDROM (read-only). For this
>you must have a data CD in the drive.
>
>To mount for writing, mount as pg instead.
>
>Hope this helps,
>
>AL
>
>
>At 09:07 PM 3/19/2002 +0100, you wrote:
>>I want to use my freecom portable CDRW witch linux.
>>I have suse linux 7.2 installed.
>>At next i have a a 2.4.18 kernel (without IEEE support for the parport)
>>installed on my system.
>>
>>Now i want to use my CDRW.
>>
>>#modprobe paride
>>#modprobe friq
>>#modprobe pcd
>>
>>At next i want to mount my CDRW.
>>
>>#mount /dev/pcd0 /media/cdrom
>>
>>But i always get the error message that an I/O error has habened and that no
>>media is in the CDRW.
>>
>>In the file /var/log/messages i have found the following error messages.
>>
>>Mar 19 19:15:02 linux kernel: paride: version 1.06 installed (parport)
>>Mar 19 19:15:27 linux kernel: paride: friq registered as protocol 0
>>Mar 19 19:15:54 linux kernel: pcd: pcd version 1.07, major 46, nice 0
>>Mar 19 19:15:54 linux kernel: parport0: PC-style at 0x378 [PCSPP(,...)]
>>Mar 19 19:15:54 linux kernel: pcd0: Sharing parport0 at 0x378
>>Mar 19 19:15:54 linux kernel: pcd0: friq 1.01, Freecom IQ ASIC-2 adapter at
>>0x378, mode 4 (EPP-32), delay 1
>>Mar 19 19:15:56 linux kernel: pcd0: Master: R/RW 2x2x24
>>Mar 19 19:15:56 linux kernel: pcd0: mode sense capabilities completion:
>>alt=0x53 stat=0x51 err=0x60 loop=0 phase=3
>>Mar 19 19:15:56 linux kernel: pcd0: mode sense capabilities: Sense key: 6,
>>ASC: 29, ASQ: 0
>>Mar 19 19:18:14 linux kernel: pcd0: WARNING: ATAPI phase errors
>>Mar 19 19:18:14 linux kernel: pcd0: Stuck DRQ
>>Mar 19 19:18:14 linux kernel: pcd0: lock door before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:18:14 linux kernel: pcd0: Request sense before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:18:14 linux kernel: VFS: Disk change detected on device pcd(46,0)
>>Mar 19 19:18:28 linux kernel: pcd0: read block before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:18:28 linux kernel: end_request: I/O error, dev 2e:00 (PCD),
>>sector 0
>>Mar 19 19:18:43 linux kernel: pcd0: read block before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:18:43 linux kernel: end_request: I/O error, dev 2e:00 (PCD),
>>sector 2
>>Mar 19 19:19:12 linux kernel: pcd0: read block before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:19:12 linux kernel: end_request: I/O error, dev 2e:00 (PCD),
>>sector 4
>>Mar 19 19:19:12 linux kernel: pcd0: read block before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:19:12 linux kernel: end_request: I/O error, dev 2e:00 (PCD),
>>sector 6
>>Mar 19 19:19:41 linux kernel: pcd0: unlock door before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:19:41 linux kernel: pcd0: Request sense before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:20:39 linux kernel: pcd0: Request sense before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:20:39 linux kernel: cdrom: open failed.
>>Mar 19 19:20:39 linux kernel: pcd0: unlock door before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:20:39 linux kernel: pcd0: Request sense before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:20:39 linux kernel: VFS: Disk change detected on device pcd(46,0)
>>Mar 19 19:21:37 linux kernel: pcd0: Request sense before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:21:37 linux kernel: cdrom: open failed.
>>Mar 19 19:21:37 linux kernel: pcd0: unlock door before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:21:37 linux kernel: pcd0: Request sense before command: alt=0x58
>>stat=0x58 err=0x100 loop=160001 phase=2
>>Mar 19 19:21:37 linux kernel: VFS: Disk change detected on device pcd(46,0)
>>
>>I hope you can help me.
>>
>>MFG
>>Stefan Riha
>>
>>--
>>Stefan Riha
>>s.riha@gmx.at
>>
>>GMX - Die Kommunikationsplattform im Internet.
>>http://www.gmx.net
>>
>>
>>-- To unsubscribe, send mail to: linux-parport-request@torque.net --
>>-- with the single word "unsubscribe" in the body of the message. --
>>
>>
>>
>
>-- To unsubscribe, send mail to: linux-parport-request@torque.net --
>-- with the single word "unsubscribe" in the body of the message. --
>
>
>
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Tue Mar 19 2002 - 16:12:44 EST