Please see the following.....
http://www.torque.net/parport/paride.html
And then.......
http://www.linuxdoc.org/HOWTO/CD-Writing-HOWTO.html
Sorry, no spoon feeding here.
-AL
At 10:18 PM 3/19/2002 -0000, you wrote:
>Can you please be more specific? I'm a newbe with linux...
>What is pg?
>
>-----Original Message-----
>From: owner-linux-parport@gear.torque.net
>[mailto:owner-linux-parport@gear.torque.net] On Behalf Of Al Crowley
>Sent: Tuesday, March 19, 2002 9:08 PM
>To: linux-parport@torque.net; s.riha@gmx.at
>Subject: Re: [PARPORT] mount a freecom portable CDRW
>
>
>
>Ooops, I meant "modprobe pg" and not "mount as pg."
>
>Once you modprobe pg, then use cdrecord to write.
>
>
>
>At 02:24 PM 3/19/2002 -0600, Al Crowley wrote:
>>
>>Mounting it via pcd0 only mounts it as a CDROM (read-only). For this
>>you must have a data CD in the drive.
>>
>>To mount for writing, mount as pg instead.
>>
>>Hope this helps,
>>
>>AL
>>
>>
>>At 09:07 PM 3/19/2002 +0100, you wrote:
>>>I want to use my freecom portable CDRW witch linux.
>>>I have suse linux 7.2 installed.
>>>At next i have a a 2.4.18 kernel (without IEEE support for the
>>>parport) installed on my system.
>>>
>>>Now i want to use my CDRW.
>>>
>>>#modprobe paride
>>>#modprobe friq
>>>#modprobe pcd
>>>
>>>At next i want to mount my CDRW.
>>>
>>>#mount /dev/pcd0 /media/cdrom
>>>
>>>But i always get the error message that an I/O error has habened and
>>>that no media is in the CDRW.
>>>
>>>In the file /var/log/messages i have found the following error
>>>messages.
>>>
>>>Mar 19 19:15:02 linux kernel: paride: version 1.06 installed (parport)
>
>>>Mar 19 19:15:27 linux kernel: paride: friq registered as protocol 0
>>>Mar 19 19:15:54 linux kernel: pcd: pcd version 1.07, major 46, nice 0
>>>Mar 19 19:15:54 linux kernel: parport0: PC-style at 0x378
>>>[PCSPP(,...)] Mar 19 19:15:54 linux kernel: pcd0: Sharing parport0 at
>>>0x378 Mar 19 19:15:54 linux kernel: pcd0: friq 1.01, Freecom IQ ASIC-2
>
>>>adapter at 0x378, mode 4 (EPP-32), delay 1 Mar 19 19:15:56 linux
>>>kernel: pcd0: Master: R/RW 2x2x24 Mar 19 19:15:56 linux kernel: pcd0:
>>>mode sense capabilities completion: alt=0x53 stat=0x51 err=0x60 loop=0
>
>>>phase=3 Mar 19 19:15:56 linux kernel: pcd0: mode sense capabilities:
>>>Sense key: 6,
>>>ASC: 29, ASQ: 0
>>>Mar 19 19:18:14 linux kernel: pcd0: WARNING: ATAPI phase errors Mar 19
>
>>>19:18:14 linux kernel: pcd0: Stuck DRQ Mar 19 19:18:14 linux kernel:
>>>pcd0: lock door before command: alt=0x58 stat=0x58 err=0x100
>>>loop=160001 phase=2 Mar 19 19:18:14 linux kernel: pcd0: Request sense
>>>before command: alt=0x58 stat=0x58 err=0x100 loop=160001 phase=2
>>>Mar 19 19:18:14 linux kernel: VFS: Disk change detected on device
>pcd(46,0)
>>>Mar 19 19:18:28 linux kernel: pcd0: read block before command:
>alt=0x58
>>>stat=0x58 err=0x100 loop=160001 phase=2
>>>Mar 19 19:18:28 linux kernel: end_request: I/O error, dev 2e:00 (PCD),
>>>sector 0
>>>Mar 19 19:18:43 linux kernel: pcd0: read block before command:
>alt=0x58
>>>stat=0x58 err=0x100 loop=160001 phase=2
>>>Mar 19 19:18:43 linux kernel: end_request: I/O error, dev 2e:00 (PCD),
>>>sector 2
>>>Mar 19 19:19:12 linux kernel: pcd0: read block before command:
>alt=0x58
>>>stat=0x58 err=0x100 loop=160001 phase=2
>>>Mar 19 19:19:12 linux kernel: end_request: I/O error, dev 2e:00 (PCD),
>>>sector 4
>>>Mar 19 19:19:12 linux kernel: pcd0: read block before command:
>alt=0x58
>>>stat=0x58 err=0x100 loop=160001 phase=2
>>>Mar 19 19:19:12 linux kernel: end_request: I/O error, dev 2e:00 (PCD),
>>>sector 6
>>>Mar 19 19:19:41 linux kernel: pcd0: unlock door before command:
>alt=0x58
>>>stat=0x58 err=0x100 loop=160001 phase=2
>>>Mar 19 19:19:41 linux kernel: pcd0: Request sense before command:
>alt=0x58
>>>stat=0x58 err=0x100 loop=160001 phase=2
>>>Mar 19 19:20:39 linux kernel: pcd0: Request sense before command:
>alt=0x58
>>>stat=0x58 err=0x100 loop=160001 phase=2
>>>Mar 19 19:20:39 linux kernel: cdrom: open failed.
>>>Mar 19 19:20:39 linux kernel: pcd0: unlock door before command:
>alt=0x58
>>>stat=0x58 err=0x100 loop=160001 phase=2
>>>Mar 19 19:20:39 linux kernel: pcd0: Request sense before command:
>alt=0x58
>>>stat=0x58 err=0x100 loop=160001 phase=2
>>>Mar 19 19:20:39 linux kernel: VFS: Disk change detected on device
>pcd(46,0)
>>>Mar 19 19:21:37 linux kernel: pcd0: Request sense before command:
>alt=0x58
>>>stat=0x58 err=0x100 loop=160001 phase=2
>>>Mar 19 19:21:37 linux kernel: cdrom: open failed.
>>>Mar 19 19:21:37 linux kernel: pcd0: unlock door before command:
>alt=0x58
>>>stat=0x58 err=0x100 loop=160001 phase=2
>>>Mar 19 19:21:37 linux kernel: pcd0: Request sense before command:
>alt=0x58
>>>stat=0x58 err=0x100 loop=160001 phase=2
>>>Mar 19 19:21:37 linux kernel: VFS: Disk change detected on device
>pcd(46,0)
>>>
>>>I hope you can help me.
>>>
>>>MFG
>>>Stefan Riha
>>>
>>>--
>>>Stefan Riha
>>>s.riha@gmx.at
>>>
>>>GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net
>>>
>>>
>>>-- To unsubscribe, send mail to: linux-parport-request@torque.net --
>>>-- with the single word "unsubscribe" in the body of the message. --
>>>
>>>
>>>
>>
>>-- To unsubscribe, send mail to: linux-parport-request@torque.net --
>>-- with the single word "unsubscribe" in the body of the message. --
>>
>>
>>
>
>-- To unsubscribe, send mail to: linux-parport-request@torque.net --
>-- with the single word "unsubscribe" in the body of the message. --
>
>
>
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Tue Mar 19 2002 - 17:31:38 EST