Re: [PARPORT] Presentation and qestion.

From: Samuel Partida (morti@andalinux.org)
Date: Mon May 13 2002 - 11:52:45 EDT

  • Next message: Votruba Petr: "RE: [PARPORT] Presentation and qestion."

    On Mon, 13 May 2002 13:21:42 +0100 (BST)
    Stephen Mollett <molletts@yahoo.com> wrote:

    > Hi,
    >
    > --- El Morti <morti@andalinux.org> wrote:
    > > ... needs the parallel port set to EPP mode...
    > > ... Compaq Presario Laptop which BIOS doesn't have
    > > any useful option, I cannot change the parellel port
    > > mode so it's in SPP by default...
    >
    > I'm not familiar with Compaq laptops, so this is only
    > a stab in the dark. Is there perhaps a DOS-based
    > configuration utility provided by Compaq (on their
    > website?) which you could use with a DOS boot disk? I
    > had to use something like this with my old Toshiba
    > laptop.
    >
    > Stephen
    >
    > __________________________________________________
    > Do You Yahoo!?
    > Everything you'll ever need on one web page
    > from News and Sport to Email and Music Charts
    > http://uk.my.yahoo.com
    >

    Hello Stephen, thanks writting to me, Compaq doesn't have such utility, in fact,
    i've called to Compaq's Support Line asking them about my problem, so they begin to say:
    "Ok, go to the LPT Properties in your Wi---ws hardware configuration..." and I tell them,
    I'm not using that, I just use Linux, they said that Compaq doesn't support Linux OS, blah
    , blah and blah... you can imaginate it. Well, I hope if there is someone who knows if it is
    possible to change the Parallel Mode from Linux because Compaq's Support Line said that it is
    possible to do it in W---ws, is that true?

    Thanks again Stephen!
    Samuel Partida. 

    -- 
-----------------------------------------
         Samuel Partida Amores
           AndaLinux dot Org

         Web: http://www.andalinux.org

          E-Mail: morti@andalinux.org
 E-Mail: morti@terceraguerramundial.com
-----------------------------------------

    -- To unsubscribe, send mail to: linux-parport-request@torque.net -- -- with the single word "unsubscribe" in the body of the message. --

    This archive was generated by hypermail 2b29 : Mon May 13 2002 - 09:59:12 EDT