On 30 Jul 2002, huascar wrote:
> the same drive... I modprobe paride, modprobe bpck6, modprobe pg, and
> then I use xcdroast, a graphical burning program. I make an image file
> before I burn, and burn at 1X...
If you just
& modprobe bpck6
that will install all the modules it depends on automatically (like
parport and paride)
you do need to install pg or pcd separately though.
make sure you have the most recent versio of cdrecord.
hth. bruce.
> On Mon,
2002-07-29 at 23:34, Jaime Herazo B. wrote: > >
> > Hi. I'm new to this list. I've had problems with a Microsolutions
> > Backpack CD-Rewriter that a friend has. I looked around the list
> > archives, and because i couldn't find an answer i post this one (if
> > there is something already posted, feel free to point me to it).
> >
> > The drive is a series 6 backpack device, so i loaded the module bpck6 as
> > advised, and the drive is detected just fine. But when i try to use it,
> > cdrecord burns about 5Mb, then it stops with a SCSI error message:
> >
> >
> > /usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
> > CDB: 2A 00 00 00 0A 60 00 00 10 00
> > status: 0x2 (CHECK CONDITION)
> > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 00 00
> > Sense Key: 0x5 Illegal Request, Segment 0
> > Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
> > Sense flags: Blk 0 (not valid)
> > resid: 32768
> > cmd finished after 0.002s timeout 40s
> > Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
> > write track data: error after 5439488 bytes
> > Writing time: 21.239s
> >
> > It happens every time i try to burn something. I checked on a windows
> > computer, and it works just fine, so it's not the drive.
> >
> > The sequence of modules i load is: parport (almost always already
> > loaded), paride, bpck6, pg. That's what i used to load back then in the
> > 2.2x times (with the proprietary driver they released instead of bpck6),
> > and it used to work just fine. The distro is Mandrake 8.2, kernel is the
> > stock one (2.4.18-6mdk, i think).
> >
> > What should i check? Is this a known bug or something else? Am i missing
> > something? Ideas about what to check?
> >
> >
> > ---------------------------------------
> > Microsoft: Writing viruses has never been easier!
> > Microsoft: The company that made email dangerous
> > Microsoft: Having a false sense of security was never so expensive
> > -----
> > Jaime Herazo Barrios /"\
> > jherazo at linuxfreemail dot com \ / ASCII Ribbon Campaign
> > ICQ number: 14721935 X Against HTML Mail,
> > Yahoo! id: jherazo_1999 / \ and News Too
> >
> >
> >
> > -- To unsubscribe, send mail to: linux-parport-request@torque.net --
> > -- with the single word "unsubscribe" in the body of the message. --
>
>
>
> -- To unsubscribe, send mail to: linux-parport-request@torque.net --
> -- with the single word "unsubscribe" in the body of the message. --
>
>
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Tue Jul 30 2002 - 12:46:14 EDT