First and for all thanks for replying!!!
Yes I tried this is the message after the pktsetup /dev/pktcdvd0
drive not ready
:Function not implemented
If I do this pktsetup /dev/pktcdvd0 /dev/pcd1 I get this
Open cd-rom: No such device
I still need help or confirmation that this will not work
thanx in advance
Op vr 06-09-2002, om 11:42 schreef Stephen Mollett:
> --- Guy Forssman <email@example.com> wrote: >
> > pg0 is the only thing wich let you writing to if you
> > have a parallel
> > writer.
> > pcd act as a cdrom and doesn't allow writing.
> Sounds like packet-cd doesn't support parallel-port
> drives yet. The pktcdvd device has to be attached to
> the CD-ROM block device, not the generic device which
> is a character device (eg. pktsetup /dev/pktcdvd0
> /dev/sr0 [or scd0] for SCSI drives). Even with the
> patch applied, you can't mount the CD device itself
> read-write; you still have to set up the pktcdvd
> device and mount that. The patch just tweaks the
> CD-ROM devices so that they can be used by pktcdvd.
> Have you tried 'pktsetup /dev/pktcdvd0 /dev/pcd0'?
> Buy a Pentium 4 (tm) for more accurate errors,
> faster crashes, brighter blue screens and
> quicker reboots!
> Do You Yahoo!?
> Everything you'll ever need on one web page
> from News and Sport to Email and Music Charts
-- To unsubscribe, send mail to: firstname.lastname@example.org --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Sat Sep 07 2002 - 14:23:26 EDT