Both of the links worked for me two seconds before I sent them...
Nate
(I was out for a few days, sorry for the delay)
----- Original Message -----
From: "Gregg C Levine" <yodathejediknight@worldnet.att.net>
To: "Nate Jenkins" <nate@uniwest.com>; <fajardo@eel.ufsc.br>
Cc: <linux-parport@torque.net>
Sent: Friday, May 16, 2003 6:38 PM
Subject: Re: [PARPORT] Problems with par (/proc/ioports)
> Hello from Gregg C Levine
> Nate are you sure about those locations?!?!? It seems that the domain has
> lapsed. I clicked there, on both, and got nothing, but complaint from the
> site. Never mind the fact that I am curious about those subjects.
> Gregg C Levine yodathejediknight@att.net or
> yodathejediknight@worldnet.att.net
> "May the Force be with you!"
> ----- Original Message -----
> From: "Nate Jenkins" <nate@uniwest.com>
> To: <fajardo@eel.ufsc.br>
> Cc: <linux-parport@torque.net>
> Sent: Friday, May 16, 2003 2:46 PM
> Subject: Re: [PARPORT] Problems with par (/proc/ioports)
>
>
> > You might try gaining exclusive control over the parallel port.
> >
> > You can do this using several options. To start, look up:
> >
> > http://cyberelk.net/tim/libieee1284/
> > http://people.redhat.com/twaugh/parport/html/parportguide.html
> >
> > (specific instructions for claim on pages respectively)
> > http://cyberelk.net/tim/libieee1284/interface/claim.html
> > http://people.redhat.com/twaugh/parport/html/x623.html
> >
> > Nate
> >
> >
> > ----- Original Message -----
> > From: "Raul Schmidlin Fajardo Silva" <fajardo@eel.ufsc.br>
> > To: <linux-parport@torque.net>
> > Sent: Friday, May 16, 2003 10:55 AM
> > Subject: [PARPORT] Problems with par (/proc/ioports)
> >
> >
> > > Hi, as I told in the last message for some reason a circuit with
leds
> > keeps blinking randomically while connected to parallel port and works
> with
> > linux.I checked at /proc/ioports and got:
> > > 0000-001f : dma1
> > > 0020-003f : pic1
> > > 0040-005f : timer
> > > 0060-006f : keyboard
> > > 0070-007f : rtc
> > > 0080-008f : dma page reg
> > > 00a0-00bf : pic2
> > > 00c0-00df : dma2
> > > 00f0-00ff : fpu
> > > 01f0-01f7 : ide0
> > > 03c0-03df : vga+
> > > 03f6-03f6 : ide0
> > > 03f8-03ff : serial(auto)
> > > 0cf8-0cff : PCI conf1
> > > b000-bfff : PCI Bus #01
> > > bc00-bc7f : Silicon Integrated Systems [SiS] SiS630 GUI
Accelerator+3D
> > > d400-d4ff : Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
> > > d400-d4ff : sis900
> > > d800-d8ff : Silicon Integrated Systems [SiS] SiS PCI Audio Accelerator
> > > ff00-ff0f : Silicon Integrated Systems [SiS] 5513 [IDE]
> > > ff00-ff07 : ide0
> > > ff08-ff0f : ide1
> > > Didn't find the parallel there but I'm not sure what could do!
> > >
> > > -- To unsubscribe, send mail to: linux-parport-request@torque.net --
> > > -- with the single word "unsubscribe" in the body of the message. --
> > >
> > >
> >
> >
> > -- To unsubscribe, send mail to: linux-parport-request@torque.net --
> > -- with the single word "unsubscribe" in the body of the message. --
> >
>
>
> -- To unsubscribe, send mail to: linux-parport-request@torque.net --
> -- with the single word "unsubscribe" in the body of the message. --
>
>
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Wed May 21 2003 - 12:00:12 EDT