Bill Roehl (garcia@tusa.org)
Tue, 29 Sep 1998 13:35:42 -0400 (EDT)
Ok, here is the dmesg output from 2.1.123 on my machine.
Linux version 2.1.123 (Linux version 2.1.123 (root@coconut) (gcc version 2.7.2.3) #2 SMP Mon Sep 28 19:41:47 EDT 1998
mapped APIC to ffffe000 (00223000)
mapped IOAPIC to ffffd000 (00224000)
Console: colour VGA+ 80x25
Calibrating delay loop... 53.04 BogoMIPS
Memory: 38900k/40960k available (868k kernel code, 416k reserved, 732k data, 44k init)
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Intel Pentium with F0 0F bug - workaround enabled.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium 75+ stepping 0c
SMP motherboard not detected. Using dummy APIC emulation.
PCI: PCI BIOS revision 2.10 entry at 0xfd3ca
PCI: Using configuration type 1
PCI: Probing PCI hardware
Swansea University Computer Society NET3.039 for Linux 2.1
NET3: Unix domain sockets 0.16 for Linux NET3.038.
Swansea University Computer Society TCP/IP for NET3.037
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
parport0: PC-style at 0x378 [SPP,PS2]
parport0: Unspecified, Unknown vendor Unknown device
Serial driver version 4.26 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
PS/2 auxiliary pointing device detected -- driver installed.
APM BIOS version 1.1 Flags 0x03 (Driver version 1.5)
Entry f000:916a cseg16 f000 dseg 40 cseg len ffff, cseg16 len ffff, dseg len ffff
Connection version 1.1
AC on line, battery status unknown, battery life 0%
battery flag 0x80, battery life unknown
Sound initialization started
<ESS ES1688 AudioDrive (rev 11) (3.1)> at 0x220 irq 5 dma 1,5
<ESS ES1688> at 0x330 irq 5 dma 0
Sound initialization complete
hda: IBM-DDLA-21620, ATA DISK drive
hdb: CD-ROM CDR-N16, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: IBM-DDLA-21620, 1551MB w/96kB Cache, CHS=788/64/63
hdb: ATAPI 6X CDROM drive, 256kB Cache
Uniform CDROM driver Revision: 2.14
paride: epat registered as protocol 0
pd: pd version 1.04, major 45, cluster 64, nice 0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
pda: Sharing parport0 at 0x378
pda: epat 1.01, Shuttle EPAT chip c3 at 0x378, mode 2 (8-bit), delay 1
pda: SyQuest EZ230A, master, 262144 blocks [128M], (512/16/32), removable media
Partition check:
pda: pda1
hda: hda1 hda2 hda3 hda4
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 44k freed
Adding Swap: 52412k swap-space (priority -1)
I don't know why it can't determine the vendor of my printer, is
it b/c it is going through the SyQuest?
-/- Bill -/-
email - garcia@tusa.org
icq # - 11398156
http - http://www.tusa.org
--- May the four winds blow you safely home...-- To unsubscribe, send mail to: linux-parport-request@torque.net -- -- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 30 Dec 1998 - 10:18:26 EST