[PARPORT] parport requires procfs for linux 2.1.123 to link

David Campbell (campbell@torque.net)
Sat, 10 Oct 1998 08:47:24 +0800

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Next message: David Campbell: "[PARPORT] Re: "Multia with HP CD-R seg-faults""
• Previous message: Ely Wilson: "[PARPORT] Re: [patch] parport-arca-16 (fwd)"
• Next in thread: Andrea Arcangeli: "[patch] no-PROCFS and/or no-SYSCTL [was Re: [PARPORT] parport requires procfs for linux 2.1.123 to link]"

I have just noticed that parport in Linux 2.1.123 requires procfs to allow the
kernel to link. Perhaps a few #ifdef in the following files are required:

drivers/misc/parport_init.c
drivers/misc/parport_pc.c
drivers/misc/parport_ax.c

I know that it is unlikely for anyone to build a kernel without /proc support but
it could happen.

David Campbell
=======================================================
campbell@torque.net

Current project list:
a) Maintain Linux ZIP drivers
b) Create Linux chipset specific parport drivers
c) Start on ParSCSI drivers

Any assistance to clearing this list most welcome

-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --

• Next message: David Campbell: "[PARPORT] Re: "Multia with HP CD-R seg-faults""
• Previous message: Ely Wilson: "[PARPORT] Re: [patch] parport-arca-16 (fwd)"
• Next in thread: Andrea Arcangeli: "[patch] no-PROCFS and/or no-SYSCTL [was Re: [PARPORT] parport requires procfs for linux 2.1.123 to link]"

This archive was generated by hypermail 2.0b3 on Wed 30 Dec 1998 - 10:18:33 EST