[PARPORT] Re: Experiment ... parallel port settings on Toshiba 660CDTg

Michel G. Breitfellner (mbreitfe@iso.vilspa.esa.es)
Fri, 04 Dec 1998 14:10:47 +0100

Hallo Grant,

So you think that the error message
"./cdrecord: Input/output error. start/stop unit: scsi sendcmd: retryable
does not matter and
"./cdrecord: fifo had 128 puts and 0 gets.
 ./cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%."
means that it would have written the CD correctly? I just tried it in "dummy"
mode. This evening I can try to burn a CD with this setting
"A:\>testport -bidir
 insmod pg drive0=0x378,0,0,-1,-1,0 verbose=1"
Do you think this correct?

In any case thanks a lot for all the time you spend in helping me!

     Michel G. Breitfellner, PhD
     Calibration scientist for the
     Infrared Space Observatory (ISO) of the
     European Space Agency (ESA)

     ESA Villafranca del Castillo
     Satellite Tracking Station
     ISO Science Operation Center
     Apartado - P.O.Box 50727
     E-28080 Madrid

     Office : B.34
     Tel. : +34 91 8131100 switchboard
                           318 office
     Fax : +34 91 8131308 SOC

     Internet : mbreitfe@iso.vilspa.esa.es
     WWW : http://www.iso.vilspa.esa.es/people/mgb.html

This archive was generated by hypermail 2.0b3 on Wed 30 Dec 1998 - 10:18:50 EST