>From: "John Pullan" <jmp@sco.com>
> I'm trying to get a Freecom traveller CD-R/RW working under RH7 but I'm
>having limited success with cdrecord. As far as I'm aware I've got the
>parport layer working. (I can read the cdrom) and I receive the following
>messages from modprobe pg
>modprobe pg drive0=0x378,0,0,-1,-1,0
>pg: pg version 1.02, major 97
>pg0: Sharing parport0 at 0x378
>pg0: friq 1.01, Freecom IQ ASIC-2 adapter at 0x378, mode 4 (EPP-32), delay 1
>pg0: CD-R/RW RW8040A, master
>However when I "cdrecord -scanbus" it fails to display any working devices.
>Now at this point I made a possibly erroneous intuitive leap and loaded
>ide_scsi.o after which -scanbus gave me -
>Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jrg Schilling
>Linux sg driver version: 2.1.38
>Using libscg version 'schily-0.1'
>scsibus0:
>0,0,0 0) 'MITSUMI ' 'CD-ROM FX4824T!B' 'Q01E' Removable CD-ROM
>0,1,0 1) *
...
>0,7,0 7) *
>scsibus1:
>1,0,0 100) ' ' 'CD-R/RW RW8040A ' '1.13' Removable CD-ROM
>but if I then try and write to the cd (in dummy mode) I get
>cdrecord -v -dummy dev 1,0,0 -data cd.iso
>Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jrg Schilling
>scsidev: '1,0,0'
>scsibus: 1 target: 0 lun: 0
>Linux sg driver version: 2.1.38
>Using libscg version 'schily-0.1'
>cdrecord: Inappropriate ioctl for device. Cannot send SCSI cmd via ioctl
It makes no sense to debug outdated code.
First try a recent release. The Libscg code has been completely rewritten.
Jörg
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.gmd.de (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Fri Oct 20 2000 - 15:33:27 EDT