On Wed, 29 Nov 2000 15:00:53 +0000, Tim Waugh wrote:
>Okay. I've put a patch in my CVS tree that adds support for this card
>to 2.4.0test.
Cheers! I must find some time during my Christmas vacation to learn
how to do a kernel compile.
And as Gunther Mayer requested, I've obtained a pci interface spec
from Avlab on their i/o cards. I've put it here, for now:
www.anvil.demon.co.uk/avlab-pci-spec.htm
But I must apologise for forgetting to mention what might be a
pertinent point: When I received the Avlab AV-P006 card, it was set to
EPP/ECP mode. I used a supplied DOS utility to set it into EPP mode.
(This mode setting is non-volatile.)
When it is set to the default EPP/ECP mode, the lspci report is:
00:09.0 Class 0701: 14db:2121 (prog-if 02)
Subsystem: 14db:2121
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at a400
Region 1: I/O ports at a000
Region 2: I/O ports at 9800
Region 3: I/O ports at 9400
Capabilities: [a0] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: db 14 21 21 03 00 90 02 00 02 01 07 08 00 00 00
10: 01 a4 00 00 01 a0 00 00 01 98 00 00 01 94 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 db 14 21 21
30: 00 00 00 00 a0 00 00 00 00 00 00 00 09 01 00 00
And when it is set to EPP mode, the lspci report is:
00:09.0 Class 0701: 14db:2121 (prog-if 02)
Subsystem: 14db:2121
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at a400
Region 2: I/O ports at a000
Capabilities: [a0] Power Management version 1
Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: db 14 21 21 03 00 90 02 00 02 01 07 08 00 00 00
10: 01 a4 00 00 00 00 00 00 01 a0 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 db 14 21 21
30: 00 00 00 00 a0 00 00 00 00 00 00 00 09 01 00 00
-- Dave Farrance-- To unsubscribe, send mail to: linux-parport-request@torque.net -- -- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Mon Dec 04 2000 - 14:39:31 EST