Re: [PARPORT] Mysterious PCI Dual Parallel Port Card

From: Dave Farrance (dsf@technologist.com)
Date: Sun Dec 03 2000 - 18:47:39 EST

  • Next message: mroberds@att.net: "Re: [PARPORT] SanDisk ImageMate flash card reader [long] (fwd)"

    On Wed, 29 Nov 2000 15:00:53 +0000, Tim Waugh wrote:

    >Okay. I've put a patch in my CVS tree that adds support for this card
    >to 2.4.0test.

    Cheers! I must find some time during my Christmas vacation to learn
    how to do a kernel compile.

    And as Gunther Mayer requested, I've obtained a pci interface spec
    from Avlab on their i/o cards. I've put it here, for now:

    www.anvil.demon.co.uk/avlab-pci-spec.htm

    But I must apologise for forgetting to mention what might be a
    pertinent point: When I received the Avlab AV-P006 card, it was set to
    EPP/ECP mode. I used a supplied DOS utility to set it into EPP mode.
    (This mode setting is non-volatile.)

    When it is set to the default EPP/ECP mode, the lspci report is:

       00:09.0 Class 0701: 14db:2121 (prog-if 02)
               Subsystem: 14db:2121
               Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
                  ParErr- Stepping- SERR- FastB2B-
               Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
    >TAbort- <TAbort- <MAbort- >SERR- <PERR-
               Interrupt: pin A routed to IRQ 9
               Region 0: I/O ports at a400
               Region 1: I/O ports at a000
               Region 2: I/O ports at 9800
               Region 3: I/O ports at 9400
               Capabilities: [a0] Power Management version 1
                       Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
                       Status: D0 PME-Enable- DSel=0 DScale=0 PME-
       00: db 14 21 21 03 00 90 02 00 02 01 07 08 00 00 00
       10: 01 a4 00 00 01 a0 00 00 01 98 00 00 01 94 00 00
       20: 00 00 00 00 00 00 00 00 00 00 00 00 db 14 21 21
       30: 00 00 00 00 a0 00 00 00 00 00 00 00 09 01 00 00

    And when it is set to EPP mode, the lspci report is:

       00:09.0 Class 0701: 14db:2121 (prog-if 02)
               Subsystem: 14db:2121
               Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
                  ParErr- Stepping- SERR- FastB2B-
               Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium
    >TAbort- <TAbort- <MAbort- >SERR- <PERR-
               Interrupt: pin A routed to IRQ 9
               Region 0: I/O ports at a400
               Region 2: I/O ports at a000
               Capabilities: [a0] Power Management version 1
                       Flags: PMEClk- AuxPwr- DSI- D1- D2- PME-
                       Status: D0 PME-Enable- DSel=0 DScale=0 PME-
       00: db 14 21 21 03 00 90 02 00 02 01 07 08 00 00 00
       10: 01 a4 00 00 00 00 00 00 01 a0 00 00 00 00 00 00
       20: 00 00 00 00 00 00 00 00 00 00 00 00 db 14 21 21
       30: 00 00 00 00 a0 00 00 00 00 00 00 00 09 01 00 00

    --
    Dave Farrance
    

    -- To unsubscribe, send mail to: linux-parport-request@torque.net -- -- with the single word "unsubscribe" in the body of the message. --



    This archive was generated by hypermail 2b29 : Mon Dec 04 2000 - 14:39:53 EST