I burned a full cd as a final test and it looked great right up until
the end when it gave "session fixation error - incomplete track in
session". I have included the more data below. I'm not sure where to go
with this now. Any suggestions?
Track 01: 627 of 627 MB written (fifo 100%).
Track 01: Total bytes read/written: 657967104/657967104 (321273 sectors).
Writing time: 4302.160s
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd:
retryable error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 00 00 00 19 00 FF FF 70 72 03 00 00 FF FF
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x03 (session fixation error - incomplete track in
session) Fru 0x0
Sense flags: Blk 0 (valid)
cmd finished after 6.531s timeout 480s
Fixating time: 6.556s
cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable
error
CDB: 55 10 00 00 00 00 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 05 00 00 00 00 19 00 FF FF 72 24 00 00 00 FF FF
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (valid)
cmd finished after 0.004s timeout 40s
cdrecord: fifo had 20080 puts and 20080 gets.
cdrecord: fifo was 0 times empty and 19929 times full, min fill was 82%.
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Fri Mar 02 2001 - 15:27:54 EST