[PARPORT] cdrecord 1.10 (write error - loss of streaming) problem

From: T K (zoerg@zworg.com)
Date: Fri Mar 02 2001 - 07:29:24 EST

  • Next message: Tim Waugh: "Re: [PARPORT] cdrecord 1.10 (write error - loss of streaming) problem"

    After a few days of battling various problems I finally got my HP7200
    configured to burn a cd. At least thats what I thought until I got the
    error "write error - loss of streaming" about 1 minute into the burn
    process. The other posts that had this problem indicate a memory
    problem, but I don't think I have a memory problem here. Here is the how
    it looked on the screen:

    Cdrecord 1.10a14 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg
    Schilling
    TOC Type: 1 = CD-ROM
    scsidev: '1,0,0'
    scsibus: 1 target: 0 lun: 0
    Linux sg driver version: 2.1.38
    Using libscg version 'schily-0.4'
    atapi: 1
    Device type : Removable CD-ROM
    Version : 0
    Response Format: 1
    Vendor_info : 'HP '
    Identifikation : 'CD-Writer+ 7200 '
    Revision : '3.01'
    Device seems to be: Generic mmc CD-RW.
    Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
    Driver flags : SWABAUDIO
    Drive buf size : 786432 = 768 KB
    FIFO size : 4194304 = 4096 KB
    Track 01: data 302 MB
    Total size: 347 MB (34:26.13) = 154960 sectors
    Lout start: 347 MB (34:28/10) = 154960 sectors
    Current Secsize: 2048
    Trying to clear drive status.
    cdrecord: Drive needs to reload the media to return to proper status.
      ATIP start of lead in: -11616 (97:27/09)
      ATIP start of lead out: 335925 (74:41/00)
    Disk type: Phase change
    Manuf. index: 34
    Manufacturer: DIGITAL STORAGE TECHNOLOGY CO.,LTD
    Blocks total: 335925 Blocks current: 335925 Blocks remaining: 180965
    Starting to write CD/DVD at speed 1 in write mode for single session.
    Last chance to quit, starting real write in 1 seconds.
    Waiting for reader process to fill input buffer ... input buffer ready.
    Performing OPC...
    Starting new track at sector: 0
    Track 01: 19 of 302 MB written (fifo 0%).cdrecord: Input/output
    error. write_g1: scsi sendcmd: retryable error
    CDB: 2A 00 00 00 27 60 00 00 10 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: F0 00 03 00 00 00 00 19 00 00 29 04 0C 09 00 00 FF FF
    Sense Key: 0x3 Medium Error, Segment 0
    Sense Code: 0x0C Qual 0x09 (write error - loss of streaming) Fru 0x0
    Sense flags: Blk 0 (valid)

    write track data: error after 20643840 bytes
    Sense Bytes: F0 00 00 00 00 00 00 19 00 00 29 0D 00 00 00 00 FF FF
    Writing time: 81.796s
    Fixating...
    Fixating time: 167.330s
    cdrecord: fifo had 758 puts and 631 gets.
    cdrecord: fifo was 41 times empty and 2 times full, min fill was 0%.

    This is a 2x burner but I set it to 1x to see if that would make a
    difference but obviously not. If anyone can give me some info it would
    be appreciated. I've put a lot of hours into this and it would be nice
    to get it working. I'm running RedHat 7 with the 2.2.16 kernel.

    -- To unsubscribe, send mail to: linux-parport-request@torque.net --
    -- with the single word "unsubscribe" in the body of the message. --

    This archive was generated by hypermail 2b29 : Fri Mar 02 2001 - 07:31:33 EST