[PARPORT] MP9805P PCI card

From: Wolfgang Rohdewald (WRohdewald@dplanet.ch)
Date: Mon Aug 27 2001 - 02:41:40 EDT

  • Next message: Jaeger, Gerhard: "[PARPORT] Disabling autodetection"

    Hi,

    I have this card with 1 parport on it but cannot configure it
    with 2.2.19 (SuSE 7.2)

    The manual says MP9805P. On the card itself it says MP8875.

    lspci reports

    00:0b.0 Serial controller: Integrated Technology Express, Inc.: Unknown device 8872 (rev 01) 00:0b.0 Serial controller: Integrated Technology Express, Inc.: Unknown device 8872 (rev 01)

    and cat /proc/pci gives

      Bus 0, device 11, function 0:
        Serial controller: Unknown vendor Unknown device (rev 1).
          Vendor id=1283. Device id=8872.
          Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable. No bursts.
          I/O at 0xa400 [0xa401].
          I/O at 0xa000 [0xa001].
          I/O at 0x9800 [0x9801].
          I/O at 0x9400 [0x9401].
          I/O at 0x9000 [0x9001].
          I/O at 0x8800 [0x8801].

    I tried

    modprobe parport_pc io=0xa400

    but still only had one port listed in /proc/parport
    (that is the port on the motherboard).

    How can I make this work?

    Wolfgang

    -- To unsubscribe, send mail to: linux-parport-request@torque.net --
    -- with the single word "unsubscribe" in the body of the message. --

    This archive was generated by hypermail 2b29 : Mon Aug 27 2001 - 02:47:58 EDT