Hi,
I have been reading through the archived and can not seem to find anything
that will help me get my Datafab MDCFE-SR CF reader working.
When I try to insert module pd I am getting
"/lib/modules/2.2.14-5.0/misc/pd.o: init_module: Device or resource busy"
errors.
The parallel port is in EPP mode, io=0x378 irq=7
If I insmod parport, parport_pc, parport_probe I get that my parport is on
io 0x378 but without an irq.
If when I install paride, and epat no problems exist. but when I install
the pd module it does not work at all. Does any one have a suggestion?
Thank you,
David Gabler
[spit] dgabler 11:57am Thu ~>uname -a
Linux spit.gablerfamily.org 2.2.14-5.0 #1 Tue Mar 7 20:53:41 EST 2000 i586
unknown
select /proc and /var/log/message contents/outputs are below.
[spit] dgabler 11:50am Thu ~>cat /proc/parport/0/autoprobe
MODEL:Unknown device;
MANUFACTURER:Unknown vendor;
[spit] dgabler 11:50am Thu ~>cat /proc/parport/0/devices
[spit] dgabler 11:50am Thu ~>cat /proc/parport/0/hardware
base: 0x378
irq: none
dma: none
modes: SPP,PS2,EPP
[spit] dgabler 11:50am Thu ~>cat /proc/parport/0/irq
none
[spit] dgabler 11:47am Thu ~>cat /proc/interrupts
CPU0
0: 117826 XT-PIC timer
1: 2 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
10: 901 XT-PIC NE2000
12: 4889 XT-PIC fasttrak, aic7xxx
13: 1 XT-PIC fpu
NMI: 0
[spit] dgabler 11:47am Thu ~>cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
02f8-02ff : serial(auto)
03c0-03df : vga+
03f8-03ff : serial(auto)
a000-a007 : ide0
a008-a00f : ide1
a800-a81f : NE2000
ac00-acbe : aic7xxx
b000-b007 : FT(base)
b402-b402 : FT(ctrl)
b800-b807 : FT(base)
bc02-bc02 : FT(ctrl)
c000-c007 : FT(BM)
c008-c00f : FT(BM)
/var/log/messages
Nov 1 11:50:06 spit kernel: parport0: PC-style at 0x378 [SPP,PS2,EPP]
Nov 1 11:50:10 spit kernel: parport0: no IEEE-1284 device present.
Nov 1 11:53:17 spit kernel: paride: version 1.04 installed
Nov 1 11:53:20 spit kernel: paride: epat registered as protocol 0
Nov 1 11:53:26 spit kernel: pd: pd version 1.05, major 45, cluster 64, nice
0
Nov 1 11:53:26 spit kernel: pda: epat: port 0x3bc, mode 0, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x3bc, mode 1, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x3bc, mode 2, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: 0x378 is parport0
Nov 1 11:53:26 spit kernel: pda: epat: port 0x378, mode 0, ccr 0,
test=(255,255,0)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x378, mode 1, ccr 40,
test=(255,255,448)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x378, mode 2, ccr 0,
test=(255,255,0)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x378, mode 3, ccr 0,
test=(255,255,0)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x378, mode 4, ccr 0,
test=(255,255,0)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x378, mode 5, ccr 0,
test=(255,255,0)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x278, mode 0, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x278, mode 1, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x278, mode 2, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x278, mode 3, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x278, mode 4, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x278, mode 5, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x268, mode 0, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x268, mode 1, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x268, mode 2, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x268, mode 3, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x268, mode 4, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x268, mode 5, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x27c, mode 0, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x27c, mode 1, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x27c, mode 2, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x26c, mode 0, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x26c, mode 1, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: epat: port 0x26c, mode 2, ccr ff,
test=(255,255,510)
Nov 1 11:53:26 spit kernel: pda: Autoprobe failed
Nov 1 11:53:26 spit kernel: pd: no valid drive found
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Thu Nov 01 2001 - 14:22:58 EST