I have buyed an freecom cdrw and an freecom portable cdrw.
The CDRW is a FREECOM PORTABLE CDRW (FC-RW-2224EU / 13504).
The CABLE is a FREECOM PARALLEL PORT CABLE (FC-Cable-PAR / 12544).
The CDRW-drive in the FREECOM CDRW is an Philips CDD3801.
At first an short direction what i have done:
Now i want to use the cdrw with linux.
On (www.torque.net/parport) i have found an direction.
In this direction stand, that i must load the modules paride, friq and pcd to
use the cdrw as an normal cd-drive.
#modprobe paride
#modprobe friq
#modprobe pcd
The module pcd found an CDRW on my parport.
pcd: pcd version 1.07, major 46, nice 0
pcd0: Sharing parport0 at 0x378
pcd0: friq 1.01, Freecom IQ ASCI-2 adapter at 0x378, mode 4 (EPP-32), delay
1
pcd0: Master R/RW 2x2x24
But i couldn't mount this cd-drive.
When i make this i always get a lot of error messages.
pcd0: WARNING: ATAPI phase errors
pcd0: Stuck DRQ
pcd0: lock door before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2
pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2
pcd0: read block before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2
end_request: I/O error, dev 2e:00 (PCD), sector 2
/dev/pcd0: Eingabe-/Ausgabefehler
pcd0: unlock door before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2
pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2
mount: blockorientiertes Gerät /dev/pcd0 ist schreibgeschützt, es wird im
Nur-Lese-Modus gemountet
pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2
pcd0: unlock door before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2
pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2
pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2
pcd0: unlock door before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2
pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100 loop=160001
phase=2
mount: Kein Medium gefunden
I have tested the CDRW with different PC's and different versions of linux,
but i always get the same error messages.
Now the new informations:
At next i have looked at the Internet. I have found the following message in
the archieve of this mailing list
("http://www.torque.net/parport/archive/hist/1045.html"). The person in this
message have the same problem like i.
Also I have found on the net the following file
("http://lists.insecure.org/linux-kernel/2000/Nov/att-1700/02-kernlog_pcd_scsi")
This file is a description of my problem (but not writen from my).
I fount this file on an archieve of the linux kernel mailing list of the
november of 2000.
I think that some person have the same problem like i.
Doas somebody knows an answear for this problem?
Do you know something more about the paride driver or do you know the person
how developt this driver?
At llast dou you know if somebody make some new versions of the driver
I hope you can help me and pleas write back.
MFG
Stefan Riha
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Wed May 29 2002 - 10:15:09 EDT