Grant R. Guenther (grant@torque.net)
Mon, 4 May 1998 17:59:51 -0400 (EDT)
> I've recently got Monkey Linux running on a 386/40MHZ machine
^^^^^^^^^^^^
Never heard of it. What is its claim to fame ?
> with 8M RAM. I connected a SparQ 1GB parallel port drive to
> LPT1, downloaded the paride tar file, built the modules,
> and installed them. I was then able to mount the SparQ
> drive and successfully list all files on the drive. The
> problem starts whenever I try to copy any files from the
> SparQ drive. The system hangs and
> "paride: do_pd_read_drq" and "paride: do_pd_read"
I'd like to see the _actual_ messages, if possible. Please repeat
your experiments and then use the 'dmesg' command to capture the
exact messages. In fact, if you would also include all the
messages relating to paride, epat, pd etc. from the moment you
load the drivers ...
--------------------------------------------------------------------------
Grant R. Guenther grant@torque.net
--------------------------------------------------------------------------
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 30 Dec 1998 - 10:17:41 EST