Re: [PARPORT] Paride and SparQ problems


Grant R. Guenther (grant@torque.net)
Tue, 19 May 1998 18:51:53 -0400 (EDT)


> Actually... i've tried this with two different motherboards... one with
> with a Tx-Pro chipset... a.k.a. ALI Alladin IV... with an AMI BIOS... and
> a DFI motherboard with an Intel TX chipset... with an Award Bios... same
> problems on both... so i just have to conclude that a parallel scanner...
> and a SparQ parallel drive... will simply not work together if they are
> attached to two seperate parallel ports

Or, the add-in parallel port is doing something bad. Can you identify
the manufacturer of the board and/or the adapter chip ?

--------------------------------------------------------------------------
Grant R. Guenther grant@torque.net
--------------------------------------------------------------------------

-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --



This archive was generated by hypermail 2.0b3 on Wed 30 Dec 1998 - 10:17:46 EST