grant@torque.net
Tue, 4 Aug 1998 14:46:03 -0400 (EDT)
> >> paride: epat registered as protocol 0
> >> paride: epia registered as protocol 1
Any special reason to load epia ?
> >> pg: pg version 1.01s, major 97
> >> pg0: epat 1.01, Shuttle EPAT chip c6 at 0x378, mode 0 (4-bit), delay 1
Fix your parallel port. You will not be able to burn a CD-R from anywhere,
let alone NFS, in mode 0. Your port should be set to "EPP" mode. Do not
use ECP mode.
--------------------------------------------------------------------------
Grant R. Guenther grant@torque.net
--------------------------------------------------------------------------
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Wed 30 Dec 1998 - 10:18:06 EST