Re: [PARPORT] MITSUMI CR2600TE


grant@torque.net
Mon, 9 Nov 1998 13:45:34 -0500 (EST)


> From: Hannes Krüger <kruegerh@uni-bremen.de>
>
> > i want to use my MITSUMI CR2600TE CD-writer (IDE/ATAPI).
> > therefore i build a kernel with PARIDE.
>
> The following URL (and linked pages) indicate that the CR2600TE is an
> internal IDE device, not a parallel port device:
>
> http://www.cdrom-guide.com/opinions/hw/1080.html
>
> The paride suite only supports IDE devices connected via a parallel port and
> not dirrectly attached to the standard IDE bus.

I believe that there _are_ some PARIDE devices based on the 2600, so it is
possible that Hannes has a noname kit with a 2600 in it. If so, the problem
could be something simple like a conflict with lp.

On the other hand, you are probably correct :-)

--------------------------------------------------------------------------
Grant R. Guenther grant@torque.net
--------------------------------------------------------------------------

-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --



This archive was generated by hypermail 2.0b3 on Wed 30 Dec 1998 - 10:18:46 EST