Jim Conner (jconner@enterit.com)
Fri, 02 Jul 1999 10:36:16 -0400
>Okay, then you don't have a low-level driver configured at all, by the looks
>of things. In 'general setup' after 'parallel port support', there's a
>'PC-style port' option -- is that checked?
Yes I have that selected. Underneath it I have selected PC-style hardware
as built-in. I do not have Support foreign hardware selected, however. Is
there anything else I might not have bundled into the last compilation that
you can think of?
Jim
At 07:18 02.07.99 +0100, you wrote:
>> that all the options of the paride section for my hardware were NOT
>> loadable but built-in. (ie there were no M's in the
>> brackets...only *'s ;)
>
>Okay, then you don't have a low-level driver configured at all, by the looks
>of things. In 'general setup' after 'parallel port support', there's a
>'PC-style port' option -- is that checked?
>
>Tim.
>*/
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Fri 02 Jul 1999 - 10:24:50 EDT