Tue, 21 Sep 1999 11:03:39 -0400 (EDT)

> Please help I am desperately trying (without luck) to install an EPAT
> compatible cd rom parallel port mobile case with an ATAPI cd rom fitted in
> it to my laptop computer.
> The name on the box of the device is SI-390A but uses shuttle technology
> drives for dos.
> I first tried with the SUSE linux 6.1 installation disks and also with the
> Red hat 6.0 installation disk with the epat drivers.
> Then I installed SUSE linux, after having booted the computer with a dos
> boot disk loading the epat dos drivers and successfully accessing the cd rom
> via a dos partition and copying the files manually to the dos partition of
> 100 Mb and tried using the insmod commands:
> #insmod parport
> #insmod paride
> #insmod epat
> #insmod pcd

At this point we really need to see the output of doing

        insmod pcd verbose=1

This will log a number of messages into your kernel log file. You should
be able to retrieve them with the 'dmesg' command. Please capture the
relevant messages and send them to us ...

Grant R. Guenther

-- To unsubscribe, send mail to: --
-- with the single word "unsubscribe" in the body of the message. --

This archive was generated by hypermail 2.0b3 on Tue 21 Sep 1999 - 11:05:05 EDT