Robert Glinka (email@example.com)
Mon, 25 Oct 1999 17:28:05 -0500 (CDT)
If the port is not bidirectional, it will still work, just a bunch slower,
you may want to check out the website
it has some info on the bi-directional/uni-directional parallel ports.
it is recomended, according to Patrick Reynolds, that you obtain a
bidirectional parallel port to use the Quickcam.
I have some code, for linux, that will detect if the camera is set up for
bi-directional, or uni-directional. But the code that I semt you should
detect (in linux) the camera no matter if it's bi or unidirectional.
On Mon, 25 Oct 1999, Tim Waugh wrote:
> On Mon, 25 Oct 1999, Jeremy Bair wrote:
> > I would love to try out your QuickCam package on the box, hopefully I can
> > take a look at the code a bit deeper and possibly obtain some hardware
> > info on the UDB's Parallel ports.
> They aren't bidirectional, which is probably why you're having problems.
-- To unsubscribe, send mail to: firstname.lastname@example.org --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Mon 25 Oct 1999 - 18:32:58 EDT