>From: Dumas Patrice <dumas@centre-cired.fr>
>Content-Transfer-Encoding: 7bit
>Hi,
>I have allready posted some messages, then I stopped, as I had no time
>for that.
>So, here is my problem again :
>I run GNU/linux, kernel 2.2.14, the distribution is Mandrake 7.0, on an
>Abit bx6, with a celeron 400 (i686 I think).
>I was trying to install an ide CD writer (Philips CDRW400 Series) on the
>paralel port. The CD writer is in an external box with no mark.
>And there is a paralel cable linking the computer and the external box.
>It runs (not so badly, but without a really good quality) under windows.
>Well, I can insmod parport,paride,on26,pg. With cdrecord -scanbus it is
>good. Then I try to use cdrecord to burn a .wav file with -dummy and it
>returns an error, and a lot of stuff with the -vv and -VV flags. I can
>give you the dmesg, but I also have tried to mount the cdrom, with pcd
>instead of pg, and there is a problem.
>I could be misunderstanding something, but I think a CD recorder should
>be able to be mounted with pcd. Am I wrong ?
>Here is the dmesg after insmoding all the stuff :
>paride: version 1.04 installed
>paride: on26 registered as protocol 0
>pcd: pcd version 1.07, major 46, nice 0
>parport0: PC-style at 0x378 [SPP]
>parport0: no IEEE-1284 device present.
>pcd0: Sharing parport0 at 0x378
>pcd0: on26 1.04, OnSpec 90c26 at 0x378, mode 0 (4-bit), delay 1
>pcd0: Master: PCRW404
>Here is the dmesg output after the command :
>#mount /dev/pcd0 /mnt/cdrom
>pcd0: WARNING: ATAPI phase errors
>pcd0: Stuck DRQ
>pcd0: lock door before command: alt=0x58 stat=0x58 err=0x100 loop=160001
>phase=2
>pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100
>loop=160001 phase=2
>VFS: Disk change detected on device pcd(46,0)
>pcd0: read block before command: alt=0x58 stat=0x58 err=0x100
>loop=160001 phase=2
>end_request: I/O error, dev 2e:00 (PCD), sector 2
>pcd0: unlock door before command: alt=0x58 stat=0x58 err=0x100
>loop=160001 phase=2
>pcd0: Request sense before command: alt=0x58 stat=0x58 err=0x100
>loop=160001 phase=2
This does not help: Read
http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/problems.html
for a usable error report.... don't send too much data...
Jörg
EMail:joerg@schily.isdn.cs.tu-berlin.de (home) Jörg Schilling D-13353 Berlin
js@cs.tu-berlin.de (uni) If you don't have iso-8859-1
schilling@fokus.gmd.de (work) chars I am J"org Schilling
URL: http://www.fokus.gmd.de/usr/schilling ftp://ftp.fokus.gmd.de/pub/unix
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2b29 : Wed Oct 18 2000 - 05:54:25 EDT