Re: [PARPORT] Upgrade 2.4.4 to 2.4.18 lost parallel port

From: Gunther Mayer (Gunther.Mayer@t-online.de)
Date: Tue Jul 16 2002 - 04:06:32 EDT

  • Next message: Moritz Barsnick: "[PARPORT] CF reader with Shuttle/SMC EP1284-01"

    Andreas Nowatzyk wrote:
    >

    > OK, the computer boots with LPT enabled:
    >
    > lssuperio V0.65 (EXPERIMENTAL)
    >
    > Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
    > SMSC Super-IO detection, now testing Ports 2F0, 370, 2E, 4E ...
    > National Semiconductor Super-IO detection,now testing port 2E,4E,15C,26E,398
    > ...
    > National Semiconductor chip at EFER=0x4e id=0x54 cr21=0x04 cr27=0x00 cr8=0x00
    > National Semiconductor chip type unknown
    > ITE Super-IO detection testing ports 2E,4E,279,370/371 ...
    ...
    > ITE chip 5404 Rev 0x39 detected at port 0x4e
    ...
    > ITE chip 5404 Rev 0x39 detected at port 0x4e
    ...
    > ITE chip 5404 Rev 0x39 detected at port 0x4e
    ...

    > This is somewhat confusing because after booting with the regular
    > Suse V8.0 image I get:
    >
    > lssuperio V0.65 (EXPERIMENTAL)
    > SMSC chip at EFER=0x4e key=0x55 id=54 rev=04

    There is a bug in 0.65 concerning false detection of ITE chips!
    Try lssuperio-0.66 (http://home.t-online.de/home/gunther.mayer/lssuperio/).

    -- To unsubscribe, send mail to: linux-parport-request@torque.net --
    -- with the single word "unsubscribe" in the body of the message. --

    This archive was generated by hypermail 2b29 : Tue Jul 16 2002 - 04:09:10 EDT