grant@torque.net
Mon, 19 Apr 1999 07:23:14 -0400 (EDT)
> Port is in EPP mode.
Although it doesn't appear to be from the output below.
> pcd: pcd version 1.05s, major 46, nice 0
> pcd0: friq: port 0x378, mode 0, test=(255,256,0)
> pcd0: friq: port 0x378, mode 1, test=(255,256,0)
> pcd0: friq: port 0x378, mode 2, test=(255,256,128)
> pcd0: friq: port 0x378, mode 3, test=(255,256,128)
> pcd0: friq: port 0x378, mode 4, test=(255,256,128)
> Looks like IQ interface is not detected at all .
Hmm. Not quite. The friq module has detected an IQ cable on 378 in
bidirectional mode. It is not in EPP mode, and it is not able to see
the drive. Is this a "Traveller" ? If so, try applying external power
and turning on the power switch, we still have some problems with the
power up timing on the battery powered model.
--------------------------------------------------------------------------
Grant R. Guenther grant@torque.net
--------------------------------------------------------------------------
-- To unsubscribe, send mail to: linux-parport-request@torque.net --
-- with the single word "unsubscribe" in the body of the message. --
This archive was generated by hypermail 2.0b3 on Mon 19 Apr 1999 - 07:25:35 EDT